Fujifilm BL-7000 4-LED Light Source

Location：Home > Our Product > Endoscopysystem > Light-Source > Fujifilm BL-7000 4-LED Light Source

Fujifilm BL-7000 4-LED Light Source

A reliable light source is a prerequisite for use in large clinics as well as smaller outpatient centres to ensure procedures can take place as scheduled.

Phone：+86-21-54286005

Resources

Overview Specifications Dimensions

BL-7000 4-LED MULTI LIGHT™ SOURCE WITH HIGH DURABILITY

A reliable light source is a prerequisite for use in large clinics as well as smaller outpatient centres to ensure procedures can take place as scheduled. To achieve high standards, the eco-friendly ELUXEO™ 7000 system features the 4-LED Multi Light™ Source, which outperforms conventional Xenon or Halogen light sources: With 10,000 hours average life expectancy for the LED lights, the ELUXEO™ system has far longer durability while having much lower energy consumption, resulting in better cost-efficiency.

BL-7000

Power rating	Voltage 100V to 240 V ~ ± 10 ％
	Frequency 50/60 Hz
	Current consumption 1.2-0.7 A
Dimensions(W×H×D)	390×155×485 mm (incl. projection)
Weight	12Kg
Illumination	Illumination source LED, qualifies 300W Xenon lamp intensity
	Durability of LED 6 years (based on FUJIFILM criteria)
	Lighting system Switching regulator
	Light control method LED Auto power control
	Light cooling method Forced air cooling
	Special light observation mode BLI, BLI-bright, LCI
	Maximum air supply pressure 65 kPa
Automatic brightness adjustment	Automatic brightness adjustment method Brightness is automatically adjusted according to the video output (manually possible).
Air supply	Pump Diaphragm method pump
Air supply	Air supply pump HI/MID/LOW/OFF
Water supply	Method Feeds water by pressurizing the detachable water container with air.
Indicators on front panel	Transmitted illumination The light flashes with the maximum light intensity. Used to check the position of the distal end from outside the body.
	Light limitation To avoid the blood of a bleeding patient becoming clotted by the illuminating light. Used to limit the maximum light intensity.
	Illumination mode OFF/1/2/3. Observation modes can be switched by pressing the illumination mode button.
Memory of set value	Set values are maintained even after turning off the system.
Category of medical electric equipment	Type of protection against electric shock Class I equipment
	Degree of protection against electric shock Type BF applied part
	Degree of explosion protection Prohibited in oxygen-rich environment/ flammable gas atmosphere.